Sony ZV-E10 firmware update

• Improves the operational stability of the camera.
• Updates from Windows or Mac only; Sony provides no memory-card version.
• It includes earlier changes: a notification when new software is available, WPA and WEP Wi-Fi no longer supported (use WPA2), and animal Eye AF in movies.

The ZV-E10 updates from a computer only (Sony provides no memory-card version).

1. Download the updater for Windows or Mac from Sony's page (button below). Your computer must be online, and Windows PCs with an ARM processor are not supported.
2. Use a fully charged NP-FW50 battery (at least three bars) and take the memory card out of the camera.
3. On the camera: Menu > Setup3 > USB Connection, and make sure Mass Storage is selected.
4. Start the updater on the computer first, then turn the camera on and connect it with the USB cable supplied with the camera. Follow the updater's steps.
5. It takes about 10 minutes. Don't turn the camera off, unplug the cable or let the computer sleep.

If the camera screen stays black for more than 10 minutes: unplug the cable, take the battery out for a few minutes, restart the computer and run the update again.

Sony's updater pages: Windows · Mac