Firmware updates › Hollyland › Hollyland Pyro H
Hollyland Pyro H firmware update
Update, but read this firstWhat's new
- S1.0.5.5 (19 Nov 2025): fixes some issues (Hollyland's note).
- V1.0.4.9 before it (15 Oct 2025): adds WPS in the receiver's Group Pairing, to pair with the Vcore, and fixes other known issues.
Should you update?
Update, but read this first
Read first: the device goes back to its default settings after updating, so note your settings and don't update on a shoot day.
How to update
- Check your version: press and hold the thumbwheel button to open the menu, then System > Version Info.
- Use a USB-C flash drive under 32 GB, formatted as FAT32. Download the firmware from Hollyland's page (button below) and put it in the root of the drive, not inside a folder.
- Make sure the device has enough power, then connect the drive to the Pyro H's USB-C port: it finds the drive and starts updating by itself.
- Don't unplug the drive until the update has finished successfully.
Hollyland: the device goes back to its default settings after the update, and don't update it while you are using it on a shoot.
Let us update it for you
Book an appointment and our salesman updates your device in our showroom: 2.000 OMR if you bought it from Skyorbits, 5.000 OMR if you bought it elsewhere (incl. VAT, paid in the showroom).
When you book, type the version your device shows now (see How to update above). He checks it first: if your device is already up to date, he tells you and you don't need to come.
We take each update's notes from the maker's own page. An update can reach devices in Oman a few days after it is published. Every fact double-checked against the maker's page: 17-10-2026