Firmware updates › Godox › Godox X3 Pro trigger
Godox X3 Pro trigger firmware update
Update nowWhat's new
- UI update.
- Adds support for LED flash control.
- Same release for every mount: X3ProC V1.22, X3ProN V1.14, X3ProS V1.11, X3ProF V1.08, X3ProO V1.08.
- Godox says to use Godox G3 V2.0 for this update.
Should you update?
Update now
A feature update for every mount. Use G3 V2.0, as Godox says.
How to update
- Check your version first: turn it on, open the menu settings and look under Device Info.
- From Godox's firmware page (button below), download the Godox G3 update software (V2.0) for Windows or Mac and the firmware file for your exact model. Godox's list runs over several pages: look for your model. The file differs by camera mount: the letter after the model name is the mount (C = Canon, N = Nikon, S = Sony, F = Fujifilm, O = Olympus/Panasonic, L = Leica, P = Pentax).
- Connect the X3 Pro to the computer with a USB cable, open G3 and follow its steps to load the file and update.
- Keep it connected and switched on until G3 says the update is complete.
Need help?
If the update stops or a step is unclear, message us on WhatsApp and we'll walk you through it.
We take each update's notes from the maker's own page. An update can reach devices in Oman a few days after it is published. Every fact double-checked against the maker's page: 16-10-2026