Firmware updates › Godox › Godox X3 trigger
Godox X3 trigger firmware update
Update nowWhat's new
- X3-C V1.38 (7 Apr 2026): adds support for Canon EOS R series cameras.
- X3-N V1.27 and X3-S V1.25 (30 Mar 2026): better control performance and camera connection; made for use with the XR / XRs receiver.
- X3-F V1.21 (30 Mar 2026): better control performance and camera connection, minor fixes.
- X3-L V1.11 (30 Mar 2026): adds support for the SL3 and Q3 cameras, minor fixes.
- X3-O V1.09 (18 Jul 2025): better control processing and camera connection.
- All need Godox G3 V1.1 or later to install.
Should you update?
Update now
Pick the file for your camera mount (the letter after X3). If you use an X3-C with a Canon EOS R camera, update.
How to update
- Check your version first: turn it on, open the menu settings and look under Device Info.
- From Godox's firmware page (button below), download the Godox G3 update software (V1.1 or later) for Windows or Mac and the firmware file for your exact model. Godox's list runs over several pages: look for your model. The file differs by camera mount: the letter after the model name is the mount (C = Canon, N = Nikon, S = Sony, F = Fujifilm, O = Olympus/Panasonic, L = Leica, P = Pentax).
- Connect the X3 to the computer with a USB cable, open G3 and follow its steps to load the file and update.
- Keep it connected and switched on until G3 says the update is complete.
Need help?
If the update stops or a step is unclear, message us on WhatsApp and we'll walk you through it.
We take each update's notes from the maker's own page. An update can reach devices in Oman a few days after it is published. Every fact double-checked against the maker's page: 16-10-2026