Firmware updates › Godox › Godox V100 flash
Godox V100 flash firmware update
Update nowWhat's new
- C V1.11, S V1.06, F V1.03, O V1.04 (8 Dec 2025): remembers the SU-1 switch and the screen lock after power-off, and lets you turn off the power-on lock in the menu. The Canon version also improves bounce-flash TTL.
- N V1.05 (10 Apr 2026): fixes occasional misfiring with Nikon Z8 and Z9 cameras.
- Needs Godox G3 V1.1 or later to install.
Should you update?
Update now
A useful update. Nikon Z8 and Z9 users: update to fix the misfiring.
How to update
- Check your version first: after it powers on, go to the menu and find the device information at the very end.
- From Godox's firmware page (button below), download the Godox G3 update software (V1.1 or later) for Windows or Mac and the firmware file for your exact model. Godox's list runs over several pages: look for your model. The file differs by camera mount: the letter after the model name is the mount (C = Canon, N = Nikon, S = Sony, F = Fujifilm, O = Olympus/Panasonic, L = Leica, P = Pentax).
- Connect the V100 to the computer with a USB cable, open G3 and follow its steps to load the file and update.
- Keep it connected and switched on until G3 says the update is complete.
Need help?
If the update stops or a step is unclear, message us on WhatsApp and we'll walk you through it.
We take each update's notes from the maker's own page. An update can reach devices in Oman a few days after it is published. Every fact double-checked against the maker's page: 16-10-2026