Firmware updates › DJI › DJI Mic 2
DJI Mic 2 firmware update
Update nowWhat's new
- Optimized EQ (equalizer) settings for a fuller and brighter sound.
- Fixed some known issues.
- Same version for the receiver and the transmitters.
Should you update?
Update now
Worth installing. DJI: to use it with the Osmo Pocket 4P, the Mic 2 transmitter needs v04.05.01.11 or later.
How to update
- Download the firmware (.bin file) from DJI's page (button below). Update the transmitters and the receiver on a computer, one at a time.
- Connect a transmitter or the receiver to the computer with the supplied USB-C cable. The receiver must be switched off when you connect it; a transmitter can be on or off.
- Put the .bin file in the root of the transmitter or receiver.
- Disconnect it from the computer. The receiver starts updating by itself and its screen shows "updating"; a transmitter starts once you switch it on, and its status light blinks red and green while it updates.
- When it is done, check the firmware version on the receiver.
DJI: if it fails, download the firmware again, restart the device and repeat. If a transmitter doesn't update after switching on, turn off Auto Record on the receiver's screen, or stop the transmitter's internal recording after connecting it to the receiver.
Let us update it for you
Book an appointment and our salesman updates your device in our showroom: 2.000 OMR if you bought it from Skyorbits, 5.000 OMR if you bought it elsewhere (incl. VAT, paid in the showroom).
When you book, type the version your device shows now (see How to update above). He checks it first: if your device is already up to date, he tells you and you don't need to come.
We take each update's notes from the maker's own page. An update can reach devices in Oman a few days after it is published. Every fact double-checked against the maker's page: 17-10-2026