Bambu Lab H2D Combo 3D Printer with AMS 2 Pro
Printing engineering parts, not ornaments?
The Bambu Lab H2D Combo is the top of the range: two independent nozzles, a 350 °C hotend and a chamber that is actively heated to 65 °C — which is what lets it hold ABS, ASA and other warp-prone materials flat. Build volume is 350 x 320 x 325 mm across both nozzles, and Bambu measures it at 600 mm/s.
It runs up to 25 colours across a maximum of 4 AMS 2 Pro and 8 AMS HT units. One AMS 2 Pro is included in this Combo. Any further AMS units are a separate purchase at extra cost — ask us and we will price them.
The two hotends are identical and interchangeable, so a spare fits either side. Note the H2D uses the AMS 2 Pro and does not support the AMS lite.
In the box: the H2D, a textured PEI build plate, spool holder, accessory box and the AMS 2 Pro. This is the AMS Combo — no laser or cutting module is included; those belong to Bambu's separate laser bundles.
Nozzles: this machine takes the H2D-family hotends, not the A1 ones. We stock 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm.
