Bambu Lab High Flow Induction Hotend with Hardened Steel Nozzle 0.8 mm (H2C right hotend)

Which nozzle should be in your Bambu?

This is a 0.8 mm hardened steel induction high-flow hotend for the RIGHT hotend position of the H2C. A 0.8 mm nozzle is the fastest of the set, for big parts where fine detail does not matter.

This is a Vortek induction hotend: it reaches PLA printing temperature in about 8 seconds, and on the H2C it lets the printer change filament without the usual purge waste (up to 7 filaments). It carries overheat, overvoltage, short-circuit and open-circuit protection.

High Flow pushes more material per second on the machines above. Bambu's own note: it fits the A1 and A2 series too, but gives no speed gain there — so it is not an A1 upgrade.

The hotend is a single assembly — heater, thermistor and nozzle together — so it swaps in without stripping the toolhead down.

Price 32.900 OMR, VAT included. Bring your printer in and we will fit it.