Firmware updates › Godox › Godox iT32 flash
Godox iT32 flash firmware update
Update nowWhat's new
- Fixes the X5C and X5Cm failing to trigger slave flashes when the camera is in Auto mode.
- Improves compatibility with the Leica M11.
Should you update?
Update now
Worth installing if you use an X5C or X5Cm transmitter, or a Leica M11. Godox: the X5L and X5Cm need the iT32 on 1.16 or later.
How to update
- Check your version first: after it powers on, go to the menu and find the device information at the very end.
- From Godox's firmware page (button below), download the Godox G3 update software (V1.1 or later) for Windows or Mac and the firmware file for your exact model. Godox's list runs over several pages: look for your model.
- Connect the iT32 to the computer with a USB cable, open G3 and follow its steps to load the file and update.
- Keep it connected and switched on until G3 says the update is complete.
Godox: you can also start the upgrade with the iT32 switched off: hold SET and plug in the USB cable. Don't upgrade when the battery is low. The X5 transmitter updates itself: mount it on the switched-off iT32 and turn the iT32 on.
Let us update it for you
Book an appointment and our salesman updates your device in our showroom: 2.000 OMR if you bought it from Skyorbits, 5.000 OMR if you bought it elsewhere (incl. VAT, paid in the showroom).
When you book, type the version your device shows now (see How to update above). He checks it first: if your device is already up to date, he tells you and you don't need to come.
We take each update's notes from the maker's own page. An update can reach devices in Oman a few days after it is published. Every fact double-checked against the maker's page: 17-10-2026