Godox Magic XT1 2.4GHz Wireless dual Microphone System with Type-C Adapter
Key Features
- For Vlogging and Content Creation
- 2 x Clip-On Transmitters with Omni Mics
- Dual-Channel Receiver
- Mono/Stereo/Safety Track Recording
- 656.2' Transmission Distance
- Receiver Charges Transmitter Units
- Dynamic Noise Reduction, Low-Cut Filter
- 10-Level Volume Adjustment
- 3.5mm TRS and USB-C Ports
- Built-In Batteries, OLED Screen
Camera-Mount Dual-Channel Receiver
The receiver features a 3.5mm TRS audio output port, which records audio directly to your compatible mirrorless or DSLR camera or USB-C mobile device using the included adapter cable. Integrated charging points allow you to insert both transmitter units into the receiver for charging for a 2-in-1 device. The back clip features a 1/4"-20 thread to secure the cold shoe adapter and slide the receiver onto your camera.
Clip-On Transmitters with Dynamic Noise Reduction
Integrated omnidirectional microphones on the transmitters capture crisp audio in your next 2-person vlog or livestream. An onboard button toggles dynamic noise reduction. The transmitters can capture audio with a 48 kHz/24-bit sampling rate and a maximum 115 dB SPL.
OLED Touchscreen, Onboard Controls
The OLED touchscreen on the receiver unit allows you to toggle between recording modes, turn on the dynamic noise reduction interface, turn on the 150 Hz low-cut interface, and adjust the 10-levels of volume for each transmitter unit, among other settings. You can also monitor your audio signal in real time.
656.2' Transmission Distance
All the components of the MAGIC XT1 system can communicate to one another from up to 656.2' away via line-of-sight 2.4 GHz technology. This transmission is resistant from interference.
Long Battery Life
The transmitter units feature built-in 80mAh battery with an 8-hour runtime. The receiver features a 680mAh battery with a 16-hour runtime and can recharge the transmitters in 2 hours. A USB-C port on the receiver can recharge its battery in 2.5 hours.
This content will be shared across all product pages.
Tags |